Finishing plasters are materials used to refine the previously plastered walls, are also called as finish coat and fine plaster.
These types of plaster are provided by the manufacturer in bagged wet plasters and lately also in a bags of dry plasters, usually with aggregate size up to 2 mm (also up to 3 mm).

PLASTERING AND TRANSPORT MACHINES

FINISHING PLASTERS, DRY OR WET.
dry or wet plasters in a bags .

PMF 10 - vertical worm pump with mixing zone, 400 V (three-phase), mixing, (at mixing cycles and NOT continuously) spraying and transport every type of finishing plasters wet or dry, high capacity hopper up to 10 bags of finish wet plaster, pump output capacity up to 26 l/min.

PMF 5 - vertical worm pump with mixing zone, 230 V (single-phase), mixing, (at mixing cycles and NOT continuously) spraying and transport every type of finishing plasters wet or dry, low power consumption, adjustable pump output capacity from 0,5 to 14 l/min.

PREMIXED WET FINISHING PLASTERS.
Wet plasters directly used on pump, or dry but premixed by mixers R 50 ( or L 25, IMPACT, only if is dry) mixing whisk or concrete mixer, to be used by pump.

FC 50 - horizontal worm pump, 230 V (single-phase), standard as filling joints machine can be a transport for finishing wet plasters, or with compressor kit can be suitable for small refine spraying , adjustable pump output capacity: 0,5 to 12 l/min.

CONTINUOS MIXERS - PLANETARY MIXER

Impact - small continuos mixer, single-phase 230 V, only 1,1 Kw power consumption, perfectly mix finishing dry plasters, mixing output capacity up to 20 l/min, aggregate size up to 5 mm, ideal for any types of mixing dry materials.

R 50 - planetary mixer, 230 V (single-phase) or 400 v (three-phase), suitable for mixing any type of dry or wet plasters with aggregate size up to 10 mm, robust and handy, it can be used to fill buckets, containers and wheelbarrows.

L 25 - continuos mixer, 230 V (single-phase) or 400 V (three-phase), perfectly mix finishing dry plasters, mixing output capacity up to 30 l/min, aggregate size up to 5 mm, also it can be combined with three-phase plastering machines.

PLASTER POWER FLOATS

M 390 - plaster power float for smoothing finishing plasters, for professional user, distinguishes for its light weight and maneuverability, simply to use, high level performance and excellent reliability of electromechanical parts; it can be adjust the speed control of the float disc and a switch for humidify with water the plaster.

M 360 - plaster power float for smoothing finishing plasters, distinguishes for its light weight and maneuverability, simply to use, and excellent reliability of electromechanical parts; possibility to adjust the speed control of the float disc and a switch for humidify with water the plaster.