_ _ _ _ _ _ _  
_
   
_
  _ _
 
 

Single-phase worm plastering machine PC 500 M and three-phase PC 500 C

 
single-phase worm plastering machine PC 500 M for all wet plasters
 

DESCRIPTION

 

Single-phase worm plastering machine PC 500 M or PC 500 C three-phase, is a machine with horizontal worm pump with a short stator, it's used to pumping all kinds of the modern wet plasters, premixed by concrete mixer or continuous mixers like IMPACT, series L 25, for silo L 60, and R 50 planetary mixer.
In depth, worm plastering machine PC 500 M or PC 500 C spraying premixed wet mortars cement, lime or gypsum based, special renders fiber reinforced based for restructuring, anti-salt, anti-humidity, fireproofing, fire protection, waterproofing, insulating, light plaster, cocciopesto; moreover it transports wet mortar for self-levelling screed, floor screed and masonry mortars with max aggregate size up to 6 mm.
With vibrating screen ( on request ) it's possible to spraying all type of traditional mortars with max. aggregate size up to 5 mm.
Single-phase worm plastering machine PC 500 M distinguishes for power feeding of 230 V single-phase and electronic variation of output capacity by inverter from 10 to 22 l/min, in fact it can be connected to classic civil buildings 230 V single-phase 3 kW of power supply, without compromised and ensuring always excellent performance.
Another characteristic of this series are the simple utilization, high reliability of pump body, reduced maintenance and very quickly clean.

 

TECHNICAL DATA

 
PC 500 M PC 500 C
Voltage 230 V single-phase 400 V three-phase
Pump motor 2,2 kW 4 kW
Maximum spraying aggregate size up to 5 mm up to 5 mm
Maximum transport aggregate size up to 6 mm up to 6 mm
Pump output capacity adjustable from 10 to 22 l/min by inverter up to 30 l/min.
Maximum pumping distance 30 m 40 m
Maximum pumping height 10 m 12 m
Hopper capacity 140 l 140 l
Length x width x height 1900 x 900 x 740 mm 1900 x 900 x 740 mm
Loading height 550 mm 550 mm
Total weight 240 kg 240 kg
Standard Hose equipment 30 m (20 m + 10 m) 30 m (20 m + 10 m)
Other material in a standard equipment Instructions manual, spray gun or transport gun, toolbox, accessories and declaration of conformity. Instructions manual, spray gun or transport gun, toolbox, accessories and declaration of conformity.
 

OPTIONAL KITS AND ACCESSORIES

 
  PC 500 M PC 500 C
Plastering machine for TRADITIONAL wet mortars.
It needs vibrating screen and spray gun.
(suggest R 50 M pan mixer)
It needs vibrating screen and spray gun.
(suggest R 50 T pan mixer)
Plastering machine for PREMIXED wet mortars.
Suggest to use IMPACT continuos mixer or L 25 MI. Suggest to use L 25 T continuos mixer or L 60 for silo application.
Plastering machine for SPECIAL high dense or adhesive based renders.
NOT applicable.
Request air compressor three-phase build-in 350 l/min.
 

DETAILED PICS

 
Vibrating screen for traditional mortars pumped by screw single-phase plastering machine PC 500 M and PC 500 C rear view of worm plaster sprayer single-phase PC 500 M and PC 500 C

Vibrating screen for traditional mortars.

Rear view of machine.

 

top page