_ _ _ _ _ _ _  
  _ _

Double-mixing plastering machine for ready-mix dry plaster CK 25

double-mixing plastering machine for ready-mix dry mortar CK 25

Plastering machine CK 25 is a three-phase worm horizontal pump, with a double-mixing system, ideal to mix, transport and spray all kinds of ready-mix dry mortars with max. aggregate size to 5 mm, cement, lime or gypsum based, for indoor, outdoor and ceilings, self-levelling floor screed and special fibered mortars.
CK 25 plastering machine is composed in two principal parts: the continuous mixer where is put in the pre-mixed dry plaster for automatic mixing with a water, and the pump feeding from the mixer, this perfect mix called "double-mixing" ensuring an excellent quality of the mixing superior than any other type of pumping system for pre-mixed plaster.
Adding to the continuous mixer the feeding hood and the sensor with a level control ( on request ) continuous mixer can automatic mixing the Silo's materials directly, so you can save time and personnel than manual use with ready-mix dry plaster in a bags.

  • It mixes perfectly by the "double-mixing" technique the material and it allows to adjust the mixture density with the dosing valve.
  • The machine is handy and provided with pneumatic tubeless wheels, it can be disassemble to helping the carrying, particularly easy the carry position.
  • The plaster machine is ergonomic and strong.
  • It is provided with water pump.
  • Continuous mixer can be mix masonry mortar
  • Increased life span for rotor a stator thanks its exclusive mixing system
  • It is soundless in the working pause too.
  • It needs little maintenance and it can be cleaned quickly
CK 25
Voltage 400 V three-phase
Pump motor 4 kW
Mixer motor 1,5 kW
Air compressor 1,5 kW
Water pump 0,33 kW
Maximum working pressure 25 -30 bar
Maximum aggregate size up to 5 mm
Pump output capacity up to 30 l/min.
Maximum pumping distance up to 40 m
Maximum pumping height up to 12 m
Hopper capacity 90 l
Length x width x height 2200 x 800 x 1200 mm
Length in a carry position 1900 mm
Loading height 970 mm
Total Weight 230 kg
Standard Hose equipment 30 m (20 m + 10 m)
Other material in a standard equipment Instructions manual, spray gun, toolbox, accessories and declaration of conformity


plastering machine CK 25 in transport position sensor with a level control for plastering machine CK 25

Carry position.

sensor with a level control.


top page