_ _ _ _ _ _ _  
  _ _

Piston plastering machine for traditional mortar P 90

Piston plastering machine P 90 Edilmac for traditional mortars



The Piston plastering machine P 90 is a plastering and transporter pump for traditional plasters, with a pumping body by single piston works by spherical valves which aspirating and compressing permit the material to transport in continuous and uniform manner.
The piston plastering machine P 90 in version P 90 M - 230 V single-phase with inverter or P 90 T - 400 V three-phase, find the right place in the handicraft sector, of small and medium buildings company, for spraying and transport traditional mortars and plasters based on cement and / or lime, on indoor, outdoor walls and ceilings, spritz beton on panels and metallic nets, jet of slab, anti-retirement or expansive mortars, for consolidation of damaged or degraded structures, jet of micropiles, transport of traditional masonry mortars, execution of first spraying liquid mortar, ecological, thixotropic and at compensated shrinkage mortars, special plasters for renovations.
Piston plastering machine P 90 M is driven by inverter that optimize performance and power consumption; it can be connected also to the domestic building with power source of 3 kW - 230 V single phase, always guaranteeing maximum reliability and continuity of the electrical service.
On web page P 90 in a building site, you can view the phases of the plastering on ceilings and indoor and outdoor walls in a civil building, performed by plastering machine P 90 M - 230 V single-phase.



  • Build-in air compressor; reliable, performing and long lasting.
  • Electric vibrating screen with a specific command switch.
  • Spray gun with pneumatic remote control.
  • Compensation system incorporated in the machine, which guarantees uniform spraying of the material, and eliminates the "pulsation" effect typical of single piston pumps.
  • Greater consistency of the plaster applied to the wall, compared to manual application or other pumps.
  • The three-phase version is standard equipped by anti-clogging safety system against pump operation overpressures, while for the single-phase version is managed by the control and protection systems of inverter.
  • Robust and easy to handle being provided with 400 mm anti-puncture rubber wheels with motion bearings, extractable grip for hand towing to easy transport in all surfaces; it' s present also hooks for lifting and carry.
  • To mixing the pumped mortars, it can be combined with planetary mixer R 50, any type of concrete mixers, muller or others.
  • High durability of pumping piston, more than 35.000 m² of plasters sprayed.
  • Minimal maintenance, quick and easy cleaning.


P 90 M P 90 T
Voltage 230 V single-phase 400 V three-phase 60 Hz
or 230 V three-phase 60 Hz
Pump motor 2,2 kW by inverter 3 kW
Maximum working pressure 10 - 15 bar 15 - 20 bar
Pumpable aggregate granulometry 0 - 6 mm 0 - 8 mm
Piston pump flow rate up to 35 l/min up to 40 l/min
Maximum pumping distance 40 - 50 m 50 - 60 m
Maximum pumping height 12 - 15 m 20 - 25 m
Hopper capacity 140 l 140 l
Length x width x height 1750 x 900 x 970 mm 1750 x 900 x 1000 mm
Material loading height 700 mm 700 mm
Weight 290 kg 300 kg
Standard Hose equipment 30 m (20 m + 10 m) 30 m (20 m + 10 m)
Other material in a standard equipment Toolbox, spray gun, operation and maintenance manual, declaration of conformity. Toolbox, spray gun, operation and maintenance manual, declaration of conformity.


piston plastering machine P 90 with concrete mixer Spray gun of piston plastering machine P 90

Combination with concrete mixer.

Spray gun.


top page