|
In the following section you can view some short videos in high definition (HD), about the using on REAL building sites, of some Edilmac produced machines by user customers.
The quality of video resolution depends from the internet connection speed, however it may be possible to set manually the video to its native high definition (HD 720p) resolution, by click on mechanism icon in the bottom-right of video that you' re watching.
The Videos are also accessible on the web page of the machines data sheet mentioned.
|
|
| |
|
 |
|
 EVUTECH video, spraying of traditional mortar in a civil building, performed by plastering machine with pistons pump EVUTECH.
Note the constant pressure of pump without fluctuations, then the excellent performance and regularity of spraying output by the spray gun.
|
|
| |
|
 |
|
TS 35 T and R 50 T video, spraying Roman-lime and hemp for renovation, mixing by R 50 T planetary mixer and sprayed by peristaltic pump TS 35 T. Note the excellent quality of mixing and the perfectly amalgamation of sprayed bio-plaster, thus avoiding the problem of applying not uniformly distributed hemp fibers with the plaster, if applied apart directly dry from the spray gun. |
|
| |
|
 |
|
TS 35 T and R 50 T video, special application of underground injections with controlled pressure in a paving, mixing by R 50 T planetary mixer and sprayed by peristaltic pump TS 35 T.
Note the excellent quality of mixture by planetary mixer, and the high pumping capacity for a big volume of injected materials in the underground. |
|
| |
|
 |
|
FC 50 video, injections with controlled pressure of fluid mortar for anchorings, to consolidate the structure of a building, performed with injector pump FC 50.
Note the excellent grouting made at low pressure (1,5 - 2 bar), by the injection gun with mechanical retention. |
|
| |
|
 |
|
CK 30 video, spraying of ready-mix dry plaster on small test wall panel, performed with plastering machine with mixing pump CK 30.
Note the excellent mixing quality and spraying output of the spray gun. |
|
| |
|
 |
|
PC 500 C video, spraying of thixotropic fiber-reinforced plaster on the walls of some hundreds meters of artificial underground duct for extra water of hydroelectric power plant, performed with plastering machine PC 500 C.
Note the excellent spraying output of the spray gun. |
|
| |
|
 |
|
M 390 video, plaster power float used to a floated wall with finishing plaster on a civic building. Note the excellent handling of the instrument, highlights also the excellent smoothing with the plaster power float M 390. |
|
| |
|
 |
|
FC 50 video of small plastering machine, spraying of traditional plaster on the walls of a civic building performed by horizontal worm pump FC 50 - 230 V single-phase 2,2 kW, small plastering machine version for traditional mortar with vibrating screen.
Note the excellent performance of this small pump that provides a good volume of sprayed mortar. |
|
| |
|
 |
|
IMPACT video, mixing of tile adhesive mortar, and then of masonry mortar, made by small continuous mixer IMPACT - 230 V single-phase.
Note the excellent of mixture quality, in this case adjusted for very high density mortar, demonstrating the excellent potential of mixer IMPACT. |
|
| |
|
 |
|
P 90 M video, spraying of plaster composed by sand and cement only on metallic reinforcement net for consolidation of crumbling walls, performed by plastering machine with piston pump P 90 M - 230 V single-phase.
Note the excellent spraying output of the spray gun. |
|
|
|
| |
|
 |
|
N° 2 video of P 90 M, spraying of traditional plaster on civil building at 4th high floor, performed by piston plastering machine P 90 M - 230 V single-phase.
Note the prevalence (4th high floor) of the pump, which maintains always excellent performance. |
|
| |
|
 |
|
N° 3 video of P 90 M, , spraying of sand and cement plaster in a civil building for renovation, performed by piston plastering machine P 90 M - 230 V (single-phase).
Note the excellent performance and regularity of sprayed plaster. |
|
| |
|
 |
|
Video P 90 T, spraying of reinforced cementious mortar composed by porphyry sand and cement with thickness up to 7 cm, for renovation of a seriously damaged building; performed by piston plastering machine P 90 T - 400 V three-phase.
Note the performance with this type of sand that is difficult to pump, and the considerable thickness applied with very dense material. |
|
| |
|
 |
|
CK 20 video, spraying of ready-mix dry mortar on some small panels for industrial use, performed by vertical worm plastering machine for ready-mix dry mortar CK 20 - 230 V single-phase.
Note the pump output capacity and the quality of spraying output of the spray gun. |
|
|
| |
|
 |
|
FC 50 video of small plastering machine, spraying of special Thixotropic plaster fiber based, aggregate size up to 6 mm, in some dividers for high-speed rail, performed by horizontal worm pump FC 50 - 230 V single-phase small plastering machine version, for special renders; specifically adjusted for spraying of a small amount of plaster useful for this application. |
|
| |
|
 |
|
FC 50 video, filling of joints between facades bricks with filling joints machine for traditional and ready-mix mortars FC 50 - 230 V single-phase.
Note the precision and speed of filling the joints performed by this machine. |
|
| |
|
 |
|
FC 20 video, filling of joints between facades bricks with ready-mix mortar performed by filling joints machine for ready-mix plaster FC 20 - 230 V single-phase.
(Also you can view the photo report about this application).
Note the precision of filling the joints performed by this small machine. |
|
