_ _ _ _ _ _ _  
  _ _

Single-phase plastering machine for finishing plasters PMF 5

Injection pump for cement single-phase PMF 5 Edilmac, also plastering machine for finishing plasters



The plastering machine for finishing plasters PMF 5 on 230 V single-phase with inverter, is a worm vertical pump that mixing and sprays in two distinct phases, wet or dry finishing plasters, skim coats, covering materials, marmorino, coloured mortars, with granulometry from 0 to 3 mm, without to use concrete mixers, muller or other mixers.
Plastering machine PMF 5 stands out for its easy used and the reliability of mechanical and structural parts, it' s standard provided by quality inverter with electronic adjustment of the pump flow rate by motopotentiometer, to satisfy any jobs need of the operator in the use of finishing materials.
The PMF 5 single-phase plastering machine is provided with a separate agitator from the pump, located inside the hopper, which mixes and makes the mixture homogeneous, facilitating the smoothing of the material with the power plaster floats M 360 and M 390.
Unique in its category, the PMF 5 integrates a manually selectable guillotine hatch divider, which divides the mixing area from the pump; when it' s closed permit to the incorporated agitator into the hopper to maintain the mixture perfectly amalgamate, to prepare dry finishing plasters or to add other components into the mixture, in this way, into the pump will enter the mortar only when it' s ready for pumping, by activating open the guillotine hatch divider.
Another interesting feature is the possibility to perform controlled pressure injections and groutings by the optional injection kit.



  • Mixes and sprays the material in two distinct phases, guaranteeing excellent mixing that also maintained over time, the possible addition of other products and the perfect homogeneity of the pumped mortar.
  • Optimized power consumption, it can be connected also to the domestic building with power source of 3 kW - 230 V single phase, always guaranteeing excellent performance, reliability and continuity of the electrical service.
  • Build-in air compressor reliable and performing, driven by inverter to optimize performance and power consumption.
  • The machine is handy in all surfaces, is provided with spinning wheels (2 with brake ) rubber and anti-puncture type with motion bearings; hooks for lifting and it can be disassemble in more parts to easy transport in a confined spaces.
  • Possibility of preparing the mixture with dry finishing plasters o skim coats in a bag and manually dosed water at the operator needs.
  • Flow rate adjustment easily from the control panel of the machine via motopotentiometer.
  • It' s provided standard with safety grid with bag opener.
  • Simple to use and quick to clean.


Voltage 230 V single-phase
Pump motor 1,5 kW by inverter
Hopper agitator motor 1,1 kW
Pumpable aggregate granulometry 0 - 3 mm
Vertical worm pump flow rate adjustable up to 14 l/min by inverter
Hopper capacity 90 l
Length x width x height 1200 x 700 x 1600 mm
Material loading height 950 mm
Weight 130 kg
Standard hose equipment 20 m - single piece
Other material in a standard equipment Toolbox, spray gun, operation and maintenance manual, declaration of conformity.


injection gun kit for controlled pressure injection of cement for pump PMF 5 Edilmac Guillotine hatch divider of single-phase plastering machine for finishing plasters PMF 5 Edilmac

Injection kit.

Guillotine hatch divider.


top page