_ _ _ _ _ _ _  
  _ _

Continuous mixer for ready-mix dry plaster L 25

Continuous mixer for ready-mix plasters Edilmac L 25



Continuous mixer L 25 version L 25 M - 230 V (single-phase) or L 25 T - 400 V (three-phase) mixes automatically with water and continuously all kinds of ready-mix dry mortars with max. aggregate size up to 5 mm.
Continuous mixer L 25 series is suitable to mixing ready-mix dry mortar in a bag, lime, cement or gypsum based, polystyrene based plasters, cork based plasters , jointing mortars, cement plaster, adhesive and reinforcing mortar, repair render, self-levelling floor screed, masonry mortar also for grouting, insulating mortars, finish dry coat, decorative render, skim coat and many type of special renders by using, when it's necessary, a differ type of mixing pipe, specifically built for special lightweight renders or particularly dense render, also with a different type of aggregate size more than 5 mm.
Continuous mixer L 25 series can be fed in different ways; manual use with a bagged ready-mix mortar and automatic use with the filter hood (on request) and the conveyor system located under the silo, or with feeding hood ( on request ) continuous mixer can automatic mixing the silo's materials directly.
Mixed mortars by L 25 series are applied manually or feed directly a plastering machine like PC500 M -C , PC500 L - I , FC 50 and TS 35 series that needs premixed wet mortar.
L 25 MI version is provided with electronic inverter for maximum performance and lower power consumption, it's particularly recommended combined with single-phase machine such as PC 500 M , FC 50 series and TS 35 M.



  • It mixes perfectly the material and it allows to adjust the mixture density with the dosing valve.
  • Excellent and constant quality of mixed mortar.
  • L 25 M with special motor with high start torque to prevent starting jams of mixe
  • High mixing output capability.
  • No wasted mortar when compared to the manual mixing.
  • It's provided with water pump in a standard equipment.
  • Handy and light weight and provided with pneumatic tubeless wheels
  • It can be disassembled in parts, to easy transport and movement.
  • The mixing pipe and the front support are easy to disassemble for perfect cleaning.
  • Front support of shaft mixer is external with bearing.
  • It's standard provided with protection net and bag opener
  • Sensor with a level control ( on request) useful combined with a plastering machine for automatic mortars feeding..
  • Feeding hood and filter hood available for automatic mixer feeding ( on request)
  • It's easy to use, suitable for anybody also without mortar mixing experience
  • It needs little maintenance and it can be cleaned quickly.


L 25 M L 25 MI L 25 T
Voltage 230 V single-phase 230 V single-phase 400 V three-phase
Mixer motor 2,2 kW high start torque 1,5 kW 2,2 kW
Water pump 0,33 kW 0,33 kW 0,33 kW
Maximum aggregate size up to 5 mm up to 5 mm up to 5 mm
Mixing output capacity up to 30 l/min. adjustable up to 30 l/min by inverter up to 35 l/min.
Hopper capacity 80 l 80 l 80 l
Length x width x height 1750 x 650 x 1100 mm 1750 x 650 x 1100 mm 1750 x 650 x 1100 mm
Total weight 120 kg 120 kg 125 kg
Other material in a standard equipment Instructions manual, toolbox, accessories and declaration of conformity. Instructions manual, toolbox, accessories and declaration of conformity. Instructions manual, toolbox, accessories and declaration of conformity.


L 25 continuous mixer for premixed mortar disassembled in parts filter hood for continuos mixer L 25

Mixer disassembled in parts.

Filter hood.


top page