|
|
Filling joints machine is a pump suitable for filling cavities of joints or spaces between bricks, stones and brick facades, pebbles and pavings, or to fill up cracks and holes, fills and anchorages in walls and ceilings.
The mortars mixed apart, is poured into the hopper of the filling joints machine, through its pumping system, the material passes in pressure into the hose and then exits from the filling joints gun output in the quantity desired.
The user can perform the filling joints by starting the pump and adjusting the mortar flow rate of pump (it depends on the machine model) directly on the remote control placed on the filling gun, by performing a precise, perfectly filled and clean filling joints, without dirtying other adjacent parts of the brick, stone or pebble. |
|
|
|
|
|
FILLING JOINTS MACHINES FOR TRADITIONAL WET MORTARS |
|
|
|
|
FC 50 - professional filling joints machine with horizontal worm pump, 230 V single-phase by inverter, it' s ensured a perfect filling of joints with traditional wet mortars, thanks to variation of pump flow rate and starting, directly on 24 V wired remote control. |
|
|
|
|
|
FILLING JOINTS MACHINES FOR READY-MIX WET MORTARS |
|
|
|
|
FC 50 - filling joints machine with horizontal worm pump, 230 V single-phase by inverter, it' s ensured a perfect filling of joints with ready-mix wet mortars, thanks to variation of pump flow rate and starting directly on 24 V wired remote control. |
|
|
|
|
|
FC 20 - small filling joints machine with vertical worm pump, 230 V single-phase by inverter, appreciated for its versatility, ergonomics and easy use, adjustment flow rate on control panel by motopotentiometer and pump starting by 24 V wired remote control. |
|
|
|
|