Machines for traditional mortars and plasters

Traditional plaster and mortar

Mixture prepared and dosed on site by the user; composed of a sand base from river, quarry or crusher, almost always in bulk, with water, lime of various kinds and / or cement / derived binders, all mixed in the necessary doses and times to create a homogeneous and balanced mix for pumping and the optimal application of traditional mortar or plaster.
All the materials that composing the traditional mixture must be handy dosed by the user and mixing them in a concrete mixer, muller or planetary mixer, then to be poured directly into the hopper provided with vibrating screen of the traditional mortar machines and then pumped.
The traditional plaster created with skillful quality by building site experts, is still highly appreciated and in demand today for its natural-based composition and undisputed structural quality, which is maintained even many years after the initial application.

PLASTERING AND TRANSPORTERS MACHINES FOR TRADITIONAL PLASTERS

FCX 80 horizontal worm pump, 230 V single-phase with inverter or 400 V three-phase, 80 l hopper capacity, combining the vibrating screen, it can be used as a compact small plastering machine for traditional wet mortars, pumpable aggregate granulometry 0 - 5 mm.

EVUTECH power axial pistons plastering machine, based on new Edilmac pistons pump concept, performance and reliability its winning formula; suitable for medium and big building company, 400 V three-phase, 250 l hopper capacity, pump flow rate up to 55 l/min, pumpable aggregate granulometry 0 - 12 mm.

P 90 piston plastering machine, leader on its category, suitable for small and medium building company, 230 V single-phase with inverter or 400 V three-phase, 140 l hopper capacity, pump flow rate up to 40 l/min, pumpable aggregate granulometry 0 - 6 mm.

TS 35 peristaltic plastering machine, easy use and cleaning its dominant character, 230 V single-phase with inverter or 400 V three-phase, 140 l hopper capacity, pump flow rate up to 30 l/min, pumpable aggregate granulometry 0 - 4 mm.

PC 500 L and PC 500 I horizontal worm plastering machines, suitable for pumping almost of plasters, 400 V three-phase with inverter and adjustable pump flow rate up to 45 l/min only for PC 500 I, 140 l hopper capacity, requested vibrating screen, pumpable aggregate granulometry 0 - 8 mm.

PC 500 M and PC 500 C horizontal worm plastering machines, suitable for pumping various type of plasters, 230 V single-phase with inverter or 400 V three-phase, 140 l hopper capacity, requested the vibrating screen, adjustable pump flow rate up to 22 l/min only for PC 500 M, pumpable aggregate granulometry 0 - 5 mm.

FC 50 (2,2 kW) small horizontal worm pump 230 V single-phase with inverter, 50 l hopper capacity, standard as filling joints machine, combining the vibrating screen and the compressor kit, only for 2,2 kW version, on necessary it can be a plaster sprayer for traditional plasters, pumpable aggregate granulometry 0 - 5 mm.

FILLING JOINTS MACHINE FOR TRADITIONAL MORTAR

FC 50 professional filling joints machine with horizontal worm pump, 230 V single-phase by inverter, 50 l hopper capacity, it' s ensured a perfect filling of joints with traditional mortars, thanks to variation of pump flow rate and starting, directly on 24 V wired remote control.

INJECTIONS PUMPS OF TRADITIONAL MORTARS

FCX 80 horizontal worm pump, 230 V single-phase with inverter or 400 V three-phase, 80 l hopper capacity, combining the injection kit with recycle, it can be perform controlled pressure injection and / or simple grouting, ensuring their perfect realizations.

FC 50 horizontal worm pump, 230 V single-phase with inverter, 50 l hopper capacity, standard as filling joints machine, combining the injection kit with recycle, it can be perform controlled pressure injection and / or simple grouting, ensuring their perfect realizations.

PLANETARY MIXER FOR TRADITIONAL MORTAR

R 50 planetary mixer, 230 V single-phase with inverter or 400 V three-phase, 150 l hopper capacity, suitable for mixing any type of dry or wet plasters with mixable aggregate granulometry 0 - 10 mm, robust and handy, it can be used to feeding plastering machines and fill buckets, grabs, wheelbarrows.

PLASTER POWER FLOAT FOR TRADITIONAL PLASTERS

M 390 professional plaster power float, light weight and manoeuvrability, excellent performance; its electromechanical part are robust and reliable, it can be adjust the speed control of the dragger disc and an electric push button switch to humidify with water the worked surface, various optional discs available.

top page