Used machines EDILMAC

Used plastering machine, filling joints machine, continuous mixer and planetary mixer, plaster power float and mortar injection pump

Verified quality used, only of EDILMAC production brand, available in the following section for immediate purchase by anyone who requests it.
In case of interest about those listed machines, or if you wish your used Edilmac machinery to be included in this section; write to Edilmac by the form "contacts".

USED SILO CONTINUOUS MIXER L60

Used Silo continuous mixer L 60 Edilmac three-phase 400 V - in a special version 2,2 kW with output capacity of 30 l/min, entire overhaul and with NEW electric water pump, mixing shaft and mixing chamber, used in a very good condition, useful to mix automatically with a pressurized water, the ready-mix dry materials stocked in silo or mini-silo, complete with silo attachment plate, manual and declaration of conformity.

USED CONTINUOUS MIXER DETAILS:
Condition Grade: Verified used, in a very good state.
Contact and location of the machinery: Direct to Edilmac's facility, Cervarese Santa Croce (PD) - Italy
Providing: complete with silo attachment plate, model ID plate, manual and declaration of conformity.
Possible options: None available.

PHOTOS:

USED FINISHING MORTAR TRANSPORTER PMF 10

Used vertical worm pump transporter for finish plaster PMF 10 Edilmac, three-phase 400 V - 2,2 kW, mixing section in the hopper with built-in 1,5 kW agitator, used in a good condition, for mixing and transport all kinds of dry or wet finishing plasters and skim coats, 20 meters of mortar hoses and remote control cable, transport gun, accessories, manual and declaration of conformity.

USED FINISH PLASTER TRANSPORTER DETAILS:
Condition Grade: Verified Used, in a good state.
Contact and location of the machinery: Direct to Edilmac's facility, Cervarese Santa Croce (PD) - Italy
Providing: complete with 20 meters of mortar and remote control cable, transport gun, toolbox and accessories, model ID plate, manual and declaration of conformity.
Possible options: Available on request addition of NEW air compressor, hose and automatism to become also plastering machine of finishing mortars and skim coats; also still on request, NEW injection kit complete with 21 meters of hose for recycling.

PHOTOS:

USED WORM PLASTERING MACHINE PC 500 I/2 WITH CONTINUOUS MIXER L 25 T

Used worm plastering machine PC 500 I/2 Edilmac three-phase 5,5 kW - 400 V inverter, special version with mobile control panel, with continuous mixer L 25 T Edilmac three-phase 2,2 kW - 400 V, complete unit for mixing and pumping ready-mix special and standard dry mortars in bags or silo, speed pump regulation by inverter integrate in the mobile control panel for greater cleanliness and manageability, continuous mixer for mixing all type of ready-mix dry mortars, 30 meters of mortar hoses, spray gun, accessories, manual and declaration of conformity.

DETAILS OF USED WORM PLASTERING MACHINE AND CONTINUOUS MIXER:
Condition Grade: Verified Used, in a good state.
Contact and location of the machinery: Direct to Edilmac's facility, Cervarese Santa Croce (PD) - Italy
Providing: complete with 30 meters of mortar and air hose, spray gun, toolbox and accessories, model ID plate, manual and declaration of conformity.
Possible options: None available.

PHOTOS:

top page