Machines for special mortars and plasters

Special plaster and mortar

Materials that not within in the standard category of plasters or mortars for normal use; these materials can have particular compositions, for example with the presence of cocciopesto, perlite, hemp or fibers of various types and with specific properties type as insulating, fireproof, water-repellent, anti-salt, anti-humidity.
Furthermore special mortars and plaster are particularly used in specific areas such as the renovation or restoration of buildings and structures, or in environments such as tunnels, bridges, naval docks, dams, catchment basins and subsoil areas of pavements, basements and foundations.
The special and renovation plasters and mortars usually are mixed apart by various type of mixers, concrete mixers or muller, in times and mixing methods that vary according to the manufacturer's instructions, therefore poured directly into the hopper of the pumps for their use.
Since the special mortars and plasters can be very varied and of a different kind, Edilmac recommends always contacting the manufacturer of the material or carefully reading the technical data sheet, to find out the correct mixing, pumping and use methods or application, which are very important for reach the technical and performance specifications of the material itself.

PLASTERING AND TRANSPORTER MACHINES FOR SPECIAL PLASTERS

PC 500 L and PC 500 I horizontal worm plastering machines, suitable for pumping almost of materials, kit on request dependent on the type of special material, 140 l hopper capacity, 400 V three-phase with adjustable pump flow rate up to 45 l/min for PC 500 I only, pumpable aggregate granulometry 0 - 8 mm.

PC 500 M and PC 500 C horizontal worm plastering machines, suitable for pumping various type of plasters, kit on request dependent on the type of special material, 140 l hopper capacity, 230 V single-phase with inverter or 400 V three-phase, adjustable pump flow rate up to 22 l/min only for PC 500 M, pumpable aggregate granulometry 0 - 5 mm.

FC 50 small horizontal worm plastering machine 230 V (single-phase) with inverter, 50 l hopper capacity, standard as filling joints machine, combined with various modular kits ( depends on material type) it can be a plaster sprayers for special thin layer materials, for example waterproof, insulating, anti-salt and others.

TS 35 peristaltic plastering machine, ideal for lightweight special materials based cork, hemp, polystyrene, clay or cereal husk, fiber mortars, insulating mortars and mortars for renovations, 140 l hopper capacity, 230 V single-phase con inverter or 400 V three-phase, pump flow rate up to 30 l/min.

EVUTECH power axial pistons plastering machine, based on new Edilmac pistons pump concept, performance and reliability its winning formula; suitable for medium and big building company, 400 V three-phase, 250 l hopper capacity, pump flow rate up to 55 l/min, pumpable aggregate granulometry 0 - 12 mm.

FCX 80 horizontal worm pump, 230 V single-phase with inverter or 400 V three-phase, 80 l hopper capacity, used to spraying also special wet plasters, adjustable pump flow rate up to 22 l/min for FCX 80 M only, pumpable aggregate granulometry 0 - 5 mm.

INJECTIONS PUMPS OF SPECIAL MORTARS

FCX 80 horizontal worm pump, 230 V single-phase with inverter or 400 V three-phase, 80 l hopper capacity, combining the injection kit with recycle, it can be perform controlled pressure injection and / or simple grouting, ensuring their perfect realizations.

FC 50 horizontal worm pump, 230 V single-phase with inverter, 50 l hopper capacity, standard as filling joints machine, combining the injection kit with recycle, it can be perform controlled pressure injection and / or simple grouting, ensuring their perfect realizations.

PMF 10 vertical worm pump, 400 V three-phase, 150 l hopper capacity, standard as finishing plastering machine, combining the injection kit with recycle, it can be perform controlled pressure injection and / or simple grouting mixed into the hopper, ensuring their perfect realizations.

PMF 5 vertical worm pump, 230 V single-phase with inverter, 90 l hopper capacity, standard as finishing plastering machine, combining the injection kit with recycle, it can be perform controlled pressure injection and / or simple grouting mixed into the hopper, ensuring their perfect realizations.

CONTINUOUS MIXERS AND PLANETARY MIXERS FOR SPECIAL MORTARS AND PLASTERS

IMPACT small continuous mixer, 230 V single-phase with inverter, only 1,1 kW of power, 55 l hopper capacity, perfectly mix special materials like adhesive, coloured plasters, thermal plasters and others, mixing output capacity up to 20 l/min, mixable aggregate granulometry 0 - 5 mm, ideal for any types of usage with bagged dry materials.

L 25 continuous mixer, 230 V single-phase with inverter or 400 V three-phase, 80 l hopper capacity, perfectly mix special dry plasters, thanks to a differ type of mixing chambers, mixing output capacity up to 30 l/min, mixable aggregate granulometry 0 - 5 mm, it can also be used to feeding plastering machines.

R 50 planetary mixer, 230 V single-phase with inverter or 400 V three-phase, 150 l hopper capacity, suitable for mixing any type of dry or wet plasters with mixable aggregate granulometry 0 - 10 mm, it can be used to feeding plastering machines.

PLASTER POWER FLOAT FOR SPECIAL PLASTERS

M 390 professional plaster power float, light weight and manoeuvrability, excellent performance; its electromechanical part are robust and reliable, it can be adjust the speed control of the dragger disc and an electric push button switch to humidify with water the worked surface, various optional discs available.

top page