Machines for ready mix plasters and mortars

Ready-mix plaster and mortar

Dry materials lime, cement or gypsum based, prepared, pre-dosed and screened by the plaster' s Manufacturer itself, typically provided in bags or stored in silos, containers or mini silos.
Ready-mix plaster, also named premixed plaster or ready-to-use plaster, is widespread into the building sites, thanks to the rapidity of use and the ease spreading of the material itself, saving time for plasters applications; these characteristics have made its indisputable success today' s.
Common ready-mix dry plasters are normally used by plastering machines with mixing pumps, which mix the ready-mix dry plaster with pressurized water from the inner machine's water system and pump it in a few seconds.
In other cases, if it choose to use open-system pumps or the ready-mix mortar requires an intrinsic mixing time that mixing pumps cannot allow, the ready-mix plaster or mortar is mixed apart using a continuous mixer in automatic with pressurized water, or a planetary or other types, by manually dosed water in a mixing and unloading cycles ensuring optimal mixing, then in the end poured directly into the pump hopper to be used.

PLASTERING AND TRANSPORTERS MACHINES FOR READY-MIX PLASTERS

USE WITH READY-MIX DRY MORTARS
Ready-mix dry plaster in bags or in silos, usable dry ONLY with mixing pumps or continuous mixers integrated into the pumps, which automatically mix the material with water and then pump it.

CK 30 vertical worm plastering machine with mixing pump, 400 V three-phase, 130 l hopper capacity, pump flow rate up to 30 l/min, excellent performance and suitable for medium building company, mix and pump ready-mix dry plasters with aggregate granulometry 0 - 5 mm.

CK 25 double mixing plastering machine, ready-mix dry mortars perfectly mixing and pumping by double-mixing system, 400 V three-phase, 90 l hopper capacity, pump flow rate up to 30 l/min, pumpable aggregate granulometry 0 - 5 mm.

CK 20 mixing plastering machine 230 V single-phase with inverter and vertical worm system, optimizing power consumption and guaranteed performance with no compromise, suitable for small building company, 90 l hopper capacity, adjustable pump flow rate up to 20 l / min, mix and pump ready-mix dry plasters with aggregate granulometry 0 - 3 mm.

USE WITH READY-MIX WET MORTARS
Ready-mix dry plasters in bags or in silos which it MUST BE MIXING APART; with water automatically using continuous mixer L 25 or IMPACT or by silo L 60; with water dosing manually using planetary mixer R 50 or mixing whisk, then to be poured into the hopper of the plastering machines for its pumping.

FCX 80 horizontal worm pump, 230 V single-phase with inverter or 400 V three-phase, 80 l hopper capacity, used to spraying also ready mix wet plasters, adjustable pump flow rate up to 22 l/min for FCX 80 M only, pumpable aggregate granulometry 0 - 5 mm.

PC 500 L and PC 500 I horizontal worm plastering machines, suitable for pumping almost of plasters, 140 l hopper capacity, 400 V three-phase with inverter and adjustable pump flow rate up to 45 l/min for PC 500 I only, pumpable aggregate granulometry 0 - 8 mm.

PC 500 M and PC 500 C horizontal worm plastering machines, suitable for pumping various type of plasters, 140 l hopper capacity, 230 V single-phase with inverter or 400 V three-phase, adjustable pump flow rate up to 22 l/min for PC 500 M only, pumpable aggregate granulometry 0 - 5 mm.

FC 50 (2,2 kW) small horizontal worm plastering machine 230 V single-phase with inverter, 50 l hopper capacity, standard as filling joints machine, combining the compressor kit, only for 2,2 kW version, on necessary it can be a plaster sprayers for plastering jobs with ready mix wet plasters, pumpable aggregate granulometry 0 - 5 mm.

EVUTECH power axial pistons plastering machine, based on new Edilmac pistons pump concept, performance and reliability its winning formula; suitable for medium and big building company, 400 V three-phase, 250 l hopper capacity, pump flow rate up to 55 l/min, pumpable aggregate granulometry 0 - 12 mm.

FILLING JOINTS MACHINES FOR READY-MIX MORTAR

FC 50 filling joints machine for bricks and stone walls, with horizontal worm pump, 230 V single-phase by inverter, 50 l hopper capacity, it' s ensured a perfect filling of joints with ready-mix mortar, thanks to variation of pump flow rate and starting directly on 24 V wired remote control.

FC 20 small filling joints machine for bricks and stones, 230 V single-phase by inverter, 25 l hopper capacity, appreciated for its versatility, ergonomics and easy use, adjustment flow rate on control panel by motopotentiometer and pump starting by 24 V wired remote control.

CONTINUOUS MIXERS AND PLANETARY MIXERS FOR READY-MIX MORTAR

IMPACT small continuous mixer, 230 V single-phase with inverter, only 1,1 kW of power, 55 l hopper capacity, perfectly mix any kinds of ready-mix dry mortars,, mixing output capacity up to 20 l/min, mixable aggregate granulometry 0 - 5 mm, ideal for any types of usage with bagged dry materials.

L 60 silo continuous mixer, 230 V single-phase with inverter or 400 V three-phase, makes the mix of dry ready-mix products in silos and mini-silos perfectly amalgamate, mixing output capacity up to 55 l/min, mixable aggregate granulometry 0 - 8 mm, it can also be used to feeding plastering machines.

L 25 continuous mixer, 230 V single-phase with inverter or 400 V three-phase, 80 l hopper capacity, perfectly mix any kinds of ready-mix dry mortars bagged or in a silo (require feeding hood), mixing output capacity up to 30 l/min, mixable aggregate granulometry 0 - 5 mm, it can also be used to feeding plastering machines.

R 50 planetary mixer, 230 V single-phase with inverter or 400 V three-phase, 150 l hopper capacity, suitable for mixing any type of dry or wet plasters with mixable aggregate granulometry 0 - 10 mm, robust and handy, it can be used to feeding plastering machines and fill buckets, grabs, wheelbarrows.

INJECTIONS PUMPS OF READY-MIX MORTARS

FCX 80 horizontal worm pump, 230 V single-phase with inverter or 400 V three-phase, 80 l hopper capacity, combining the injection kit with recycle, it can be perform controlled pressure injection and / or simple grouting, ensuring their perfect realizations.

FC 50 horizontal worm pump, 230 V single-phase with inverter, 50 l hopper capacity, standard as filling joints machine, combining the injection kit with recycle, it can be perform controlled pressure injection and / or simple grouting, ensuring their perfect realizations.

PMF 10 vertical worm pump, 400 V three-phase, 150 l hopper capacity, standard as finishing plastering machine, combining the injection kit with recycle, it can be perform controlled pressure injection and / or simple grouting mixed into the hopper, ensuring their perfect realizations.

PMF 5 vertical worm pump, 230 V single-phase with inverter, 90 l hopper capacity, standard as finishing plastering machine, combining the injection kit with recycle, it can be perform controlled pressure injection and / or simple grouting mixed into the hopper, ensuring their perfect realizations.

PLASTER POWER FLOATS FOR READY-MIX PLASTERS

M 390 professional plaster power float, light weight and manoeuvrability, excellent performance; its electromechanical part are robust and reliable, it can be adjust the speed control of the dragger disc and an electric push button switch to humidify with water the worked surface, various optional discs available.

M 360 plaster power float, distinguishes for its light weight, manoeuvrability and simply to use, its electromechanical part are robust and reliable, it can be adjust the speed control of the dragger disc and an electric push button switch to humidify with water the worked surface, various optional discs available.

top page